← Takaisin vertailuun
Ruoka

1 litra pullovettä (PET-pullo)

1 liter bottled water (PET bottle)

0.7
Truecost-arvo
Datan luotettavuus: KORKEA

Carbon from multiple industry and academic LCAs. Waste from NAPCOR. Toxicity is directional.

Litra pullovettä PET-pullossa tuottaa noin 160 g CO₂e ja jättää 25 g muovijätettä. Pulloveden hiilijalanjälki on satoja kertoja suurempi kuin hanavedellä, ja PET-pullosta liukenee antimonia ja mikromuoveja veteen.

Tiesitkö? Kehittyneissä maissa pullovedet ovat ilmaston ja ympäristön kannalta yksi turhimmista tuotteista — hanavesi on yhtä puhdasta, 450-kertaa pienemmällä hiilijalanjäljellä ja ilman mikromuoveja.
Läpinäkyvä laskenta

Miten tähän lukuun päädyttiin?

Truecost-arvo lasketaan absoluuttisista fysikaalisista arvoista. Jokainen rivi alla näyttää mitattavan arvon, miten se normalisoitiin, ja mistä lähteestä se tulee.

Ulottuvuus Absoluuttinen arvo Pistearvo 100 = Normalisoitu Paino Painotettu Luotettavuus
Hiilipäästöt 0.16 kg CO₂e 9.5 kg CO₂e 1.68 ×0.35 0.59 KORKEA
Vedenkulutus 1.4 liters 3840 liters 0.04 ×0.2 0.01 KESKITASO
Maankäyttö 0.0003 m²·year 51 m²·year 0.0 ×0.2 0.00 KESKITASO
Jäte 0.025 kg 5 kg 0.5 ×0.15 0.07 KORKEA
Myrkyllisyys 0.5 µDALY 162 µDALY 0.31 ×0.1 0.03 MATALA
Truecost-arvo (painotettu summa) 0.7

Osuus vuotuisesta planeettabudjetistasi

Hiilipäästöt 0.02%
Vedenkulutus <0.01%
Jäte <0.01%
Myrkyllisyys <0.01%
Lähdedata ulottuvuuksittain

Mistä absoluuttiset arvot tulevat?

Hiilipäästöt
KORKEA
NIH/BIER study: 163g CO₂ per 1.5L European bottle = 109g/L. North American 500mL: 83g = 166g/L. CarbonCloud: 0.28 kg CO₂e/kg for 1L bottle. Normalized for 1L: ~160g CO₂e. Breakdown: PET production 38%, transport 29%, retail 12%, water extraction/treatment 21%.
  • BIER (2012): Research on the Carbon Footprint of Bottled Water — Beverage Industry Environmental Roundtable
  • NIH (2023): Life Cycle Environmental Impact of PET Water Bottles
  • CarbonCloud (2024): Water 1L PET bottle — product report

Well-studied. Range: 100-300g CO₂e/L depending on transport distance and bottle weight. Local spring water at lower end, imported at higher.

Vedenkulutus
KESKITASO
IBWA data: 1.41 liters total water (including the 1L consumed) to produce 1L finished bottled water. Additional lifecycle water for PET production not included. Full lifecycle water footprint including PET: up to 3-6 L per L of product.
  • IBWA (2024): Environmental Footprint of Bottled Water
  • UNEP (2020): Single-use plastic bottles LCA recommendations

The 1.41L IBWA figure is conservative — only production water. Full lifecycle including PET resin production is higher.

Maankäyttö
KESKITASO
PET from petroleum — minimal direct land use. Bottling plants have small footprint per unit. Negligible per liter.
  • NIH (2023): Life Cycle Environmental Impact of PET Water Bottles

Land use is not the relevant dimension for bottled water.

Jäte
KORKEA
1L PET bottle weighs ~25g (range: 20-35g depending on design). Only ~33% recycled globally (NAPCOR 2023). Remaining ~67% goes to landfill or environment. PET persists 450+ years.
  • NAPCOR (2023): PET Life Cycle Assessment Report
  • IBWA (2024): Environmental Footprint of Bottled Water

PET waste is a major environmental concern. Even when recycled, downcycling is common.

Myrkyllisyys
MATALA
PET bottles contain antimony trioxide catalyst. Antimony leaches at elevated temperatures. Microplastic particles found in 93% of bottled water samples (Mason et al. 2018). Long-term health effects uncertain but endocrine disruption potential exists.
  • Mason et al. (2018): Synthetic polymer contamination in bottled water — Frontiers in Chemistry
  • Westerhoff et al. (2008): Antimony leaching from PET bottles — Water Research 42

Microplastic and antimony exposure is real but health impact quantification in µDALY is very uncertain.

Vertailut

Metodologia

Based on BIER (2012) and NIH lifecycle assessments. Covers PET resin production, bottle manufacturing, water extraction, filling, transport, retail, and disposal.

Lähteet